Ninja BLENDER PRO WITH AUTO-IQ BN500SM, Инструкция по эксплуатации

Страница: 5 / 36

5
SG ninjakitchen.sg | MY ninjakitchen.my
22 DO NOT allow the unit or the cord
to hang over the edges of tables or
worktops. The cord may become
snagged and pull the appliance off the
work surface.
23
DO NOT allow any part of the unit to
contact hot surfaces, including stoves
and other heating appliances.
24 ALWAYS use the appliance on a dry and
level surface.
25
NEVER place a blade assembly on the
motor base without it first being attached
to its corresponding container (bowl,
pitcher, cup) and lid.
26 ONLY use attachments and accessories
that are provided with the product or are
recommended by SharkNinja. The use of
attachments not recommended or sold
by SharkNinja may cause fire, electric
shock or injury.
27
During operation and handling of the
appliance, avoid contact with moving
parts.
28 DO NOT operate the appliance with an
empty container.
29
DO NOT fill containers past the MAX FILL
or MAX LIQUID lines.
30 DO NOT microwave any containers or
accessories provided with the appliance.
31
DO NOT perform grinding operations
with the Single-Serve Cup and Pro
Extractor Blades™ Assembly.
32
Before operation, ensure all utensils are
removed from containers. Failure to
remove utensils can cause containers to
shatter and potentially result in personal
injury and property damage.
33
Keep hands, hair, clothing, as well as
utensils out of container while processing
to reduce the risk of severe injury to
persons or damage to the appliance. A
scraper may be used but only when the
appliance is not running.
34 NEVER
operate the appliance without
lids and caps in place.
DO NOT
attempt
to defeat the interlock mechanism.
Ensure the container and lid are properly
installed before operation.
35
DO NOT expose the containers and
accessories to extreme temperature
changes. They may experience damage.
36 NEVER leave the appliance unattended
while in use.
37
DO NOT blend hot liquids. Doing so may
result in pressure buildup and steam
exposure that can pose a risk of the user
being burned.
38 DO NOT attempt to remove the container
and lids from the motor base while the
blade assembly is still spinning. Allow the
appliance to come to a complete stop
before removing lid and container.
39
Remove the Pro Extractor Blades
Assembly from the Single-Serve Cup
upon completion of blending. DO
NOT store ingredients before or after
blending them in the cup with the
blade assembly attached. Some foods
may contain active ingredients or
release gases that will expand if left in a
sealed container, resulting in excessive
pressure buildup that can pose a risk of
injury. For ingredient storage in the cup,
use only Spout Lid to cover.
40 The maximum wattage rating for this
appliance is based on the configuration
of the Pro Extractor Blades Assembly
and Single-Serve Cup. Other
configurations may draw less power
or current.
41
If you find unmixed ingredients sticking to
the sides of the cup, stop the appliance,
remove the blade assembly, and use a
scraper to dislodge ingredients.
42 DO NOT process dry ingredients without
adding liquid to the Single-Serve Cup.
The Single-Serve Cup is not intended for
dry blending.
43
To protect against risk of electrical shock,
DO NOT immerse the motor base in
water or other liquid.
44 If the appliance overheats, a thermal
switch will activate and temporarily
disable the motor. To reset, unplug
the appliance and allow it to cool for
approximately 15 minutes before using
again.
SAVE THESE INSTRUCTIONS
ENGLISH