9
1-877-646-5288
Assembly and Use for the Food Processor Bowl
ASSEMBLY
1
Review warning and caution statements above before
proceeding to number 2.
2
Place the motor base on a clean, dry, level surface such
as a counter or table top.
3
Align and lower the Bowl onto the motor base.
(Fig. 1)
Handle should be aligned slightly to the right of the
“
LOCK
” symbol on the motor base.
4
Rotate the bowl clockwise to lock into place. You will
hear a click when the lock is engaged.
(Fig. 2)
5
The bowl can be placed on the motor base two ways;
the handle can be on the front right corner or the front
left corner.
(Fig. 3a, Fig. 3b)
6
Holding the desired Blade Assembly by the top of the
shaft, place it onto the drive gear inside the bowl.
Ensure that the Blade Assembly is seated properly and
is standing upright.
(Fig. 4)
NOTE:
The Blade Assembly will fit loosely on the drive
gear.
7
Add the ingredients to the bowl, making sure that they
do not exceed the highest measured marking line on
the side of the bowl.
8
Holding the lid by the handle in the upright position,
place it on top of the bowl aligning the arrow ( )
located on the lid with the arrow ( ) located on the
bowl’s handle.
(Fig. 5)
Press the handle down until you
hear a click.
NOTE: The 64 oz. bowl is not intended for
blending drinks. Do not overfill.
NOTE:
To add liquids during processing,
open the drizzle hole on the top of the
lid and pour the liquid slowly into the
mixture.
9
Plug the power cord into the electrical
outlet and press the power button ( ).
IMPORTANT: As a safety feature, the power
button ( ) will flash and the motor will not work
if the bowl and lid are not installed correctly.
When the bowl and lid are installed properly, the
power button ( ) will be solid, indicating that the
appliance is ready for use.
Fig. 4
Fig. 5
Fig. 1
Fig. 3a
Fig. 3b
Fig. 2
WARNING: Chopping Blade Assembly is sharp and not locked in place. Make sure to carefully remove lid and Chopping
Blade Assembly, holding it by the shaft, before emptying contents. Failure to do so will result in a risk of laceration.
WARNING: Remove utensils prior to processing. Failure to remove may cause the bowl to be damaged or to shatter,
which may cause personal injury.
WARNING: Never leave the appliance unattended while in use.
CAUTION: Do not blend hot liquids, doing so may cause excessive pressure buildup, resulting in risk of the user being
burned.
CAUTION: Remove the lid from the bowl upon completion of processing. Some ingredients have the potential to expand
after blending resulting in excessive pressure buildup that can pose a risk of injury.
IMPORTANT: Make sure that the motor base is plugged in for use
