7
8
www.ninjakitchen.com
1-877-646-5288
10
Review
ALL
warning and caution statements before
proceeding.
11
Select the speed that best suits your needs.
(Fig. 6)
NOTE:
Pulse ingredients for even chopping by pressing
down in short intervals.
12
When you have reached your desired consistency, stop
the appliance by pressing the power button ( ) and
wait for the attachment to stop turning.
(Fig. 7)
13
To remove the lid, press the release button on the lid,
pull the lid handle up to a 90° angle and lift the lid off.
Turn the pitcher counter clockwise and then lift off the
base.
(Fig. 7, Fig. 8)
WARNING: Never insert your hands in the pitcher
as the Stacked Blade Assembly is sharp. Always
use a spatula to dislodge food that has stuck to
the sides of the pitcher.
Assembly and Use for the Blender Pitcher - cont.
Fig. 7
USE
REMOVAL
Fig. 6
Fig. 8
14
Open the pour spout cap and use the spout to empty
liquid contents.
15
For thicker consistencies, first remove the lid by
pressing the release button and pulling the lid handle
up to a 90 degree angle to lift lid off the pitcher. Then,
carefully remove the Stacked Blade Assembly by the
top of the shaft. Place Stacked Blade Assembly away
from the work area to avoid accidental contact. Finally,
empty contents from the pitcher.
16
Make sure that the unit is unplugged when not in use.
17
To release the motor base from the counter or table top,
place your hands underneath both sides of the motor base
and gently pull the unit up and towards you.
(Fig. 9)
Fig. 9
1
Review warning and caution statements above before
proceeding to number 2.
2
Place the motor base on a clean, dry, level surface such
as a counter or table top.
3
Add ingredients to the Nutri Ninja
®
cup.
4
Place the Nutri Ninja Blade Assembly onto the cup and
screw it tightly until you have a good seal.
(Fig. 1)
5
Turn the Nutri Ninja
®
cup upside down and place it
onto the motor base, aligning the tabs on the cup with
the motor base. Turn the Nutri Ninja
®
cup clockwise to
lock into place. You will hear a click when the lock is
engaged.
(Fig. 2)
Turn the power button on, the single
serve button will illuminate.
6
Press down on the Single Serve button in short
intervals to activate.
(Fig. 3)
7
Once you have reached your desired consistency,
turn the power button off. Turn the Nutri Ninja
®
cup
counter-clockwise and pull straight up to remove.
(Fig. 4, Fig. 5)
Assembly and Use for the Nutri Ninja
®
Cup
Fig. 3
Fig. 4
Fig. 5
ASSEMBLY
USE
REMOVAL
NOTE:
Do not overfill! To avoid spilling, do not add
ingredients past the “Max” fill line.
8
Turn the cup upright and remove the Nutri Ninja Blade
Assembly by twisting the blade assembly counter-
clockwise.
9
Place the To-Go drinking lid onto the Nutri Ninja
®
cup,
twist to seal and enjoy!
10
Make sure that the motor base is unplugged when not
in use.
11
To release the motor base from
the counter or table top, place your
hands underneath both sides of the
motor base and gently pull the unit
up and towards you.
(Fig. 6)
NOTE:
To order additional Nutri
Ninja
®
Cups, please visit our website:
www.ninjakitchen.com
or feel free to contact
customer service:
1-877-646-5288
.
Fig. 2
Fig. 1
For best results, use short “
PULSES
”... Practice makes perfect!!
Fig. 6
WARNING: Handle the Nutri Ninja Blade Assembly with care, as the blades are sharp.
WARNING: Remove utensils prior to processing. Failure to remove may cause the Nutri Ninja cup to be
damaged or to shatter, which may cause personal injury.
WARNING: Never leave the appliance unattended while in use.
CAUTION: Do not blend hot liquids, doing so may cause excessive pressure buildup, resulting in risk of the
user being burned.
CAUTION: Remove the Nutri Ninja Blade Assembly from the cup upon completion of blending. Some
ingredients have the potential to expand after blending resulting in excessive pressure buildup that can pose
a risk of injury.
IMPORTANT: Make sure that the motor base is plugged in for use.
