8
9
FREEPHONE: 0800 51 41 31
Before First Use
1
Remove all packaging material and labels from
the appliance.
2
Wash the lids, cups and attachments in warm, soapy
water with a soft cloth.
CAUTION: Handle the blade assemblies with care
when washing as the blades are very sharp.
3
Rinse and dry thoroughly.
4
Cups, lids and attachments are all dishwasher safe.
It is recommended that the lids and attachments be
placed on the top rack. Ensure that the attachments
are removed from the cups before placing in the
dishwasher.
5
Wipe the motor base clean with a damp cloth.
1
Place the motor base on a clean, dry, level surface such
as a counter or table top.
2
Add ingredients to the cup.
3
Place the Pro Extractor Blade
™
onto the cup and twist it
on tightly until you have a good seal.
(Fig. 1)
4
Turn the cup upside down and place it onto the motor
base, aligning the tabs on the cup with the motor base.
Turn it clockwise, the unit is ready for use.
(Fig. 2)
5
Press down on the top of the cup in short intervals to
activate.
(Fig. 3)
PLEASE KEEP THESE IMPORTANT
SAFEGUARDS IN MIND WHEN USING THE
APPLIANCE:
WARNING: Never leave the appliance
unattended while in use.
CAUTION: Blades are sharp! Use extreme
caution when handling the blade
assemblies. Always hold them by the base of
the blade assembly.
CAUTION: DO NOT PROCESS HOT FOODS OR
HOT LIQUIDS.
CAUTION: Never attempt to remove the cup
while the appliance is still running.
IMPORTANT: Attachments are
interchangeable.
IMPORTANT: Never run the appliance empty.
Fig. 1
Use
ASSEMBLY
PULSE
REMOVAL
6
When you have reached your desired consistency, stop
the appliance by removing your hand from the cup.
Wait for the motor to stop running. Then turn the cup
anticlockwise
(Fig. 4)
and pull straight up to remove.
(Fig. 5)
NOTE:
Do not overfill! To avoid spilling, do not add
ingredients past the Max fill line.
7
Turn the cup upright and remove the Blade Assembly
by twisting the blade assembly anticlockwise. Be sure
to store the Blade Assembly attached to an empty cup
when not in use.
8
Place the Sip & Seal
™
lid onto the cup, twist to seal and
enjoy!
9
Make sure that the motor base is unplugged when not
in use.
For best results, use short “
PULSES
”!
Fig. 2
Fig. 3
Fig. 4
Fig. 5
WARNING: Never leave the appliance unattended while in use.
CAUTION: Handle the blade assemblies with care, as the blades are very sharp.
IMPORTANT: Make sure that the motor base is plugged in for use.
