ERROR CODE
Error Code
Fault
Diagnostic Step
Resolution
00
Normal Status
Normally ok; Turn off and on
the scooter to see if the error
persists
Normally ok
02
Brake
Check brake lever on
handlebar and see if brake
springs back all the way
Give the brake lever a few
hard presses to ensure that it
is not stuck; If jammed, then
unclog the source of the jam
Check brake caliper to see it
the brake line is springing
back to original position
If brake caliper is not
springing back, spray some
WD40 to make sure it springs
back to original position
06
Battery
Undervoltage
Check LCD setting P03 and
P15; Give battery a full
charge to see if issue persists
P03 should be in accordance
to the voltage specified in the
user manual. P15 should be
the specified voltage - 6V
07
Motor Fault
Unplug and plug motor
connector back in to see if
issue persists
If problem is resolved, then
make sure connector is
pushed in all the way.
If issue persists; check motor
wire and connector pins to
see if there are any issues
Either replace the motor or
replace motor wire.
Brake Sensor Activated
35
Error codes
