SPECIFICATIONS
Model No:OS1605Mi
Cutting Style: Micro cut
Entry Width: 220 mm
Shred Size: 5×14mm
Shred Capacity: 16 sheets (A4 Paper)
1 PC CREDIT CARD
Waste bin for paper: 28 liter
credit card: 1.0 liter
Input: 230VAC,50Hz,570W 2.5A
Machine Size: 360×286×602 mm
Net Weight: 13.34kg
NAMES OF COMPONETS
1. REV 2. FWD
3. OFF/ON 4. Credit card intake
5. Paper intake 6. Indicator
7. Transparent window 8. Bottom wheel
9. Handle 10. Switch
OPERATION
1. Prepare paper or card to be shredded by removing labels or any other foreign matter.
2. Shred capacity per pass
Paper: 16Sheets Maximum
Credit Card: 1 Pc. Maximum
CD: 1 Pc. Maximum
3. Press the switch to REV/FWD/ECS position for your desired setting:
REV: Reverses shredding direction and backs item out of the shredder in the event of a jam.
FWD: Forward shredding direction and clear jammed paper in the shredder.
POWER: Power switch. After the power supply is connected to the machine, press the button, and then
press the shutdown, it can be used for emergency stop.
ALWAYS UNPLUG THE SHREDDER BENFORE ATTEMPTING TO REMOVE AN ITEM MANUALLY
4. Insert item to be shredded into the appropriate feed opening.
5. The solid basket is for convenient disposal of content.
SAFETY SYMBOLS
Warning:
Please pay more attention to the safety instruction , before
operate the machine otherwise wrong operation will result in danage to
users.
Product is not intended for use by
children (product is not a toy)
Avoid hair touching the document feed
opening.
Avoid touching the document
feed opening with hands.
Do not insert paper clips or staples into
the infeed slot.
Avoid clothing and long necklaces
or bracelets touching the
document feed opening
Keep aerosol products away (for
products incorporating a universal
(brush ) motor.
INSTALLATION
1. When no paper in the throat, the shredder will be always cut off, and will not be turned on by pressing
any switch on the panel except the ON/OFF switch. Potential injuries can be prevented.
2. When inserting paper into the slot, the shredder will be turned on automatically, no need to press the
ON/OFF switch at the back of the shredder again.
3. Plug into a power of 230V/50Hz, press the power switch, the green power light ( ) will lluminate,
the shredder is standby for 5 seconds, when shredding is finished
。
the shredder will be turned off automatically, power consumption is almost zero.
4. When paper is jammed, the paper can be cleared automatically or by pressing REV/FWD switch to
turn on the shredder to clear the jammed paper.
IMPORTANT NOTES
1. If the paper is wider than the feed entry and is folded to fit, the paper thickness increases and the
recommended capacity may be exceeded.
2. If the basket is removed or ajar, the shredder will the safety interlock
3. If the basket does not make complete contact with the safety interlock switch that is built into the basket
frame, the machine will not operate
4. When the paper is shredding, the LED light( )blinking, that means the paper is shredding.
5. When the LED light( ) illuminate, means the basket is open or not in the right position.
6. If the shredder is overload, it will automatically shut down and the Red LED light ( ) will illuminate
until it is safe to resume shredding again. Please set the switch to “REV” to back the paper out of the
unit, then clear redundant paper and press switch on ”FWD”, the machine can work normally .
7. If the shredder is overheat, it will automatically shut down and the Red LED light( ) will illuminate
until it is safe to resume shredding again.
8. The Red LED light ( ) will illuminate when the basket is full of paper, and the basket will show blue light.
9. Do not shred labels or paper with labels affixed to them. By doing so will void your warranty. Also this
will gum the cutting blades and cause the shredder to malfunction.
