15
Do not put the chart display into any liquid. It will break the device.
Do not touch the optical parts. It may leave finger print or grease on the lens to influence the
device performance.
Note: there might be some pixels disappear on the screen or have some red, blue or green pixels.
This does not mean the LCD penal is broken. It is caused during the production of the panel.
2.6 Device dispose
Note
Disposal of the device and parts should follow the local laws or restrictions.
Disposal of the device can be done by specified industrial waste dispoal contractors.
Recyling and disposal of the packing material should follow local laws and restrictions.
3. Equipment parts
1 Chart display
2 Base (optional)
3 Wall mount kit
4 Power transformer
5 Power cord
6 User manualExternal USB and AUDIO ports
7 Red/green frame
8 Polarized frame
9 Radio remote control
4. Device Installation
4.1 Intall of device support
Optional installment: table support and wall mount.
Standard installment is wall mount. Procedures are as follow:
A. Install the wall mount kit for the device on specified position as shown in
below picture and fix it with 4 M4*12 pan head cross screws.
B. Drill holes for the setscrews at the position where the device will be isntalled.
Then fix the wall mount kit for the wall on the position in the direction shown
in below picture.
