7
AUTOMATIC CUT-OFF
A cut-off switch is fitted to the heating element to prevent damage due to overheating. If
it cuts-off due to an obstruction in the airflow, the heater must be allowed to cool for 15
minutes and the obstruction must be removed before restarting.
Notice:
Heater will only work if fan switch is on and thermostat is set above current room
temperature.
CLEANING AND CARE
⚫
Before cleaning, always remove the plug from the electrical socket. Ensure that
the unit is cool enough to work on.
⚫
Do not use harsh chemicals or solvents to clean this product and avoid using
abrasive cleaning agents.
⚫
The heater and glass parts need only to be wiped clean with a dry, soft cloth; do not
use polishes or abrasive materials.
⚫
Do not immerse in water or any liquid when you clean it.
⚫
Use a slightly damp, lint-free cloth to clean this appliance.
TROUBLE SHOOTING
No heat or light: Check the wall socket by plugging in a working appliance. If socket is
functional, and the cord or plug of the heater is suspected to be faulty, have it checked by an
electrician.
Light but no heat: Check that the Thermostat on the stove is set above the current room
temperature. Alternatively, the automatic cut-off may have engaged - see Automatic Cut-Off
section.
SPECIFICATIONS
POWER SUPPLY: 220
–
240V ~ 50Hz
POWER CONSUMPTION: 1400W~1600W
Disposal
Environmental Protection
Waste electrical production should not be disposed of with
household waste. Please recycle where facilities exist. Check with
your Local Authority or retailer for recycling advice.
NINGBO ANKE ELECTRICAL TECHNOLOGY CO., LTD.
NO.300 ZHENXING SOUTH ROAD, SIMEN TOEN, YUYAO CITY, NINGBO, ZHEJIANG P. R. CHINA
