Ninety One Meraki E Series, Руководство пользователя

Страница: 39 / 49

37
© Alpha Vector India Private Limited | Ninety One
PEDAL LUBRICATION AND ADJUSTMENT: Many pedals cannot be disassembled to allow
access to the internal bearings and axle. However, it is usually possible to inject a little oil onto
the inside bearings, and this should be done every six months. If the pedal is the type that can
be fully disassembled, then the bearings should be removed, cleaned and greased every six
to twelve months. Because of the wide variety of pedal types and their internal complexity,
disassembly procedures are beyond the scope of this manual and further assistance should
be sought from a professional bicycle mechanic.
If replacing the original pedals with a new set, make sure the size and the axle thread is
compatible with the cranks on your bicycle.
NOTE: Never try and force a pedal with the wrong thread size into a bicycle crank. If the
pedal is too loose or too tight, it is the wrong pedal and might come loose in use.
CHAIN INSPECTION
The chain on your bicycle must be kept clean, rust free and frequently lubricated (91 dealer
recommended oil/ phoenix lines) in order to have the best possible performance when riding
and extend its life as long as possible. It will require replacement if it stretches, wears, breaks,
due to excessive dirt or debris embedded in the chain. Make sure that there are no stiff links;
they must all move freely.
CHAIN LUBRICATION:
The chain should be lubricated (91 dealer recommended oil/ phoenix lines) with light oil at
least every month, or after use in wet, muddy, or dusty conditions. Take care to clean the
chain of debris before lubrication. After lubrication, wipe off excess oil. NOTE: Do not get oil
on the tires or rim braking surfaces.