Ninebot Gokart Pro, Руководство пользователя

Страница: 6 / 22

2 Diagram 3 Adjustment
Handbrake handle
Seat
Steering wheel
(AA) Battery
compartment
Throttle (right)
Brake (left)
Front bumper
Status indicator
Headlight
Seat belt
Waist protector
Rear spoiler
Scalable structure
of frame
Steering wheel
quick-release components
Electrical connection
cable plug
Attachment straps
Connection tube
Support rods
(with frame adjustment marking)
Strap fixing hole
Adapter pad
Stretch the frame and adjust the length
of the body
Adjust the steering wheel height
a Raise the steering wheel to a suitable height.
b Insert the quick-release screw into the hole of
the corresponding height.
(See Accessory No. 1)
c Tighten the quick-release nut.
d Press to fix the steering wheel quick-release
components.
e Ensure the steering wheel is not loose.
Otherwise, repeat the steps b, c, d, e.
f Install the Gokart batteries.
To avoid issues that may be caused by
corrosion, remove the batteries if not using the
Gokart for an extended period of time.
a
b
b
c
d
a
Power Button
Taillight
Rear bumper
* Press to power on,
press and hold to power off.
(Ninebot Engine Speaker location)
Remove the speaker before adjusting the
height of the steering wheel (see page 11).
Power extension cord
a With both hands holding the steering wheel and the
seat, stretch the frame out to a suitable position
along the horizontal direction of the connection
tube.
b Align the scalable structure of the frame with the
marking on the connection tube.
c Positioning: Use the short hex wrench to press the
two screws into the holes on the left and right
connection tube in order, as shown in the figure
(The screw is set to a depth of about 1 cm for
successful position)
.
d Tighten the 4 screws.
Four screws are already
inserted into the screw holes.
b
c
d
a
f
08 09