10
Operating instructions - SKY RUNNER RTF FTR 2.4 GHz No. NE2007FTR
"Primary" and "expanded" control function setting
The transmitter offers the facility to adjust the sensitivity
of the stick movements. We recommend "softer" reduced
travels for beginners.
Open the transmitter battery compartment and insert the
four AA cells* (check for correct polarity).
Switching sensitivity:
Switch the transmitter on, and
press the right-hand stick
in.
If you have converted the transmitter to Mode 1, the left-
hand stick must be pressed in.
* Please read the information regarding dry cells on page 4.
Reduced control function
The full black disc on the
"Dual-Rate status indicator" disc is
reduced to half.
Enlarged control function:
Press the right-hand stick
in again.
The full black disc on the
screen now reappears.
Mode 2
Converting the transmitter from "Mode 2"
(throttle left) to "Mode 1" (throttle right)
The transmitter is supplied set to Mode 2 as standard. If
you prefer Mode 1 and wish to convert the transmitter to
that mode, use this procedure:
The transmitter must be switched off.
Undo the four control unit retaining
screws on the front face of the trans-
mitter.
Remove the control unit, turn it
through 180°, and replace it.
Re-fit the four screws to secure the
control unit again.
