11
Binding the transmitter to the model:
- Switch the transmitter on, then connect the flight battery.
- Locate the T-button (binding button) and hold it pressed in for about three seconds.
- If initialisation (binding) is successful, the receiver's status LED glows constantly.
- Binding is retained when the system is switched off. The procedure only needs to be repeated if you replace the
receiver or transmitter
Transmitter adjustment facilities:
Setting up a throttle curve:
to program the throttle curves, please follow the description in the instructions supplied with your T8J radio
control system (8.2 Programming the throttle curve (THR CURVE), page 40).
Setting up a collective pitch curve:
to program the collective pitch curves please follow the description in the instructions supplied with
your T8J radio control systems (8.9 Setting collective pitch travel (COLL TRAVEL), page 47)
Setting tail rotor gyro gain:
to adjust the gain of the tail rotor gyro please follow the description in the instructions supplied with your T8J
radio control system (8.5 Gyro (gyro gain), page 44)
T
S
Operating Instructions - SOLO PRO 229 EC145 Police FTR RTB 2.4 GHz
No. NE3524RTB
SOLO PRO 229 EC145 Black FTR RTB 2.4 GHz
No. NE3525RTB
