●
Using gravity mode for flying control:
When switching to gravity mode, the control interface only shows throttle stick and rudder stick.
【
Picture10
】
Left or Right: Tilting the mobile device left or right will cause the quadcopter tilt and start moving that
direction.
Forward or Backward: Tilting the mobile device forward or backward will cause the quadcopter to tilt and
start moving that direction.
Climb or Descend: Keep pressing the throttle stick. Then moving it up or down will cause the quadcopter
to climb or descend.
Nose Rotates: Keep pressing rudder stick. Then moving it left or right will cause the quadcopter nose to
rotate that direction.
3)Land. Click 15 Land switch. Quadcopter will land slowly to the ground.
4)Emergency Land In case of emergency.click 10 Emergency Landing. Motor will stop rotating at once and
quadcopter will fall down immediately.
gravity
mode
Trim
Primary
mode
6.Video/Photo Shooting
7.Switch between High rate and Low rate
1)Video shooting
●
By transmitter - Press button “VIDEO /PICTURE ON” one time on the top right corner of transmitter
backside, and WIFI camera will start camera shooting. Press button “VIDEO OFF” one time on the top
left corner of transmitter backside to stop shooting and save video.
●
By APP- Click 11 Video shooting to start (the icon 11 Video shooting on the screen will flash), and click
11 Video shooting again to stop video shooting.
Attention: Before removing the li-po battery, please make sure to stop the video shooting to save
video. Otherwise, the video can not be saved.
2)Photo Shooting
●
By transmitter - Under above video shooting mode, press the button “VIDEO /PICTURE ON” one time
on the top right corner of transmitter backside, WIFI camera will take one picture.
●
By APP - Click 12 Photo taking to take one photo. Keep pressing the icon 12 Photo taking, camera will
take photos continuously
Note: Time interval for continuous photo shooting can be adjusted in APP Setting.
Low rate: Suitable for beginners or indoor flying.
High rate: Suitable for advanced beginners or outdoor flying.
Quickly press right stick one time and transmitter will sound
“Bi” between high rate and low rate. The voice “Bi” sounds
loud and clear when low rate turns to high rate. The voice
“Bi” sounds not loud when high rate turns to low rate.
Quadcopter flight performance is more flexible under the
high rate mode.
High
rate/Low
rate switch
【
Picture11
】
