Nine Eagles Galaxy Visitor 6 NE-MASF 15, Инструкция по эксплуатации

Страница: 10 / 20

Put quadcopter in horizontal level, and then connect li-po battery to quadcopter. During this stage,
please don’t touch quadcopter body and keep it still and quiet till initialization is done.
After 5 seconds, put li-po battery into the battery compartment.
Please note that after initialization is done, the tail indicator light will turn to solid on.The front and back
indicate light will be solid on.
GALAXY VISITOR 6 has a safe start feature that prevents motor working unless the throttle stick has
been lowered to the lowest position.
If motor doesn’t work, main rotor blade doesn’t spin, please make sure the throttle stick is on the lowest
position and leave it there for few seconds. Then tying to move throttle stick slowly.
3)Flying precaution
GALAXY VISITOR 6 is a lightweight quadcopter that is suggested to fly indoor or in calm winds less
than 5mph. It should be flown in a large area of at least 15
㎡
without obstacles.
Crash
If you have operated radio control models in the past, then you probably already realize that it is not a
matter of “if” you are going to crash, it is a matter of “when” you are going to crash. Once you realize the
model is going to collide with something or crash into the ground, you should always keep throttle stick
at the lowest position to stop the main rotor blades from rotating. If you can remember to do this,
chances are you will not damage the quadcopter in the crash. The main rotor blades carry a lot of RPM
and inertia during flight. Cutting the power to the main rotor blades will prevent most of crash damage.
4)Takeoff
Slowly add power, observe the model and make all of necessary corrections to keep the model level.
When the quadcopter hovers, you only need to control the throttle stick.
5)Hovering
Once the quadcopter is up in the air, try to hold the quadcopter in one spot. If this is your first model
quadcopter, it will require some practice. Wind or air currents have a big effect on the stability of
quadcopter. Be patient and try to anticipate where the quadcopter will move.
6)Landing
Level the quadcopter into a steady hover and slowly decrease power until the quadcopter lands on the
ground.
Picture1 Picture2
2)Connect quadcopter and Li-po battery
8
2
NE-MASF 15 2.4GHZ 4CH Quadcopter