NH92007 RTF – NH92008 ARF GLIDER PRO
NINCOAIR is brand of NINCO DESARROLLOS S.L.
Ctra. de l’Hospitalet 32
08940 Cornella Barcelona Spain
CIF B-60307725 · www.nincoair.com
9
Items required: Philips head screwdriver and AA size batteries for transmitter x 8pcs.
ENGLISH
WARNINGS:
Radio control models are not toys. Serious injury to people or damage to property can result if not
used in a responsible manner.
It is not recommended for children under 14 years old and should only be flown by experienced radio
control pilots. It is recommended that this model only be flown at dedicated radio control flying sites.
Read all instructions carefully prior to assembling and before flying this model. Seek advice should any
information be unclear. You assume all risk and responsibility when using this model.
CONTENT:
Fuselage – Main wing reinforce stick – Left wing – Right wing – Horizontal stabilizer – Rudder – Folding
propeller set – Transmitter – Charger – Battery – ESC – V tail.
1. TRANSMITTER OPERATION AND FLIGHT CONTROLS.
The transmitter requires 8 AA size alkaline batteries (not included). Fit them into
the battery compartment at the rear of the transmitter paying careful attention in
order to observe correct polarity.
Transmitter control layout for MODE 2 radio:
1. Rudder control
5. Elevator trim lever 9. Servo reverse switches
2. Throttle control
6. Aileron control
10. On/Off power switch
3. Rudder trim lever 7. Elevator control
11. Battery indicator
4. Throttle trim lever 8. Aileron trim lever
12. Power indicator
