Nimos Micro-Trac, Руководство пользователя

Страница: 13 / 27

Usermanual
NIMOS Micro-Trac
Page
12
)
IMPORTANT! Don’t steer your transporter while using the differential lock.
4.7 Differential lock:
The differential lock can be shifted during driving by kicking the pedal (14) in with your left heel. Use this when
one of the rear wheels is slipping or blocking.
¾
The danger zone must be well survey able for the driver all the time. For good view, it is necessary that
windows and mirrors are clean and that the mirrors are well adjusted.
¾
If machine stops going uphill, disengage PTO (attachments drive) and backup slowly. Look behind you before
backing up.
4.8 Load
On the type print you find the masses and allowed loads of your transporter. Take care that the maximum load
is not exceeded.
Spread the load equally in the platform and close all sides after loading. Ensure all sides are closed before
driving. Take care that during transport no load drops from the platform.
4.9 Tipping
Place the transporter on a flat and solid underground and check if the pins are put in at the good side of the
platform. Open the side before tipping.
Let the tipping platform lower before driving and shift the tipping switch (22) after lowering the platform in the
neutral position.
)
CAUTION! The maximal allowed transverse slope during operation of the machine is 15% in both
directions.
)
CAUTION! When tipping, one has to take care that there are no persons in the direct
neighbourhood of the platform, because there exists a danger of jamming during
lowering the platform.
)
WARNING! Never tip sideways when extra sides mounted!