25
KSKY/02/04.09.2019
6.
Device Installation and Usage Instructions
Before first usage of the device the nebulizer and it’s accosaries should be
cleaned and
disinfection. Check Chapter 7. “Cleaning Disinfection”
1)
First open the whole package and take-out the device and accessories.
2)
Install the air-tube to air out hole on the device as it is shown in the picture.
3)
Install the other edge of air-tube to down side of medication cup as it is
shown in the picture.
4)
Turn the medication cup lid reverse of clockwise and pull up and take out it.
5)
Put the right type and amount of medication in to medication cup as your
doctor advised to you.
While putting the medication do not pass the maximum limits of medication
cup. Maximum capacity of medication cup is 8 ml.
6)
Place the vaporiser head under the lid of the medication cup so that the tabs
engage as shown in the figure below
Nebulization Control Valve
Medication Cup
Lid
Vaporiser Head
Medication Tank
