11
INSTALLATION
The cabinet is supplied from the factory
with the door hung on the right. The
door can be changed to being hung on
the left.
If this is required, contact
the manufacturer or the
manufacturer’s service
agent.
REVERSING THE DOOR SWING OPENING
PLACEMENT/ATTACHMENT
LEVELLING
The drying cabinet should stand level
on a
flat surface
, resting on all four feet.
Use an Allen wrench and correct the
position of all four adjustable feet from
the outside.
ATTACHMENT TO WALL
The cabinet
must be attached to a wall
to prevent tipping over.
The assembly kit contains two angle
brackets mounted on the top of the
drying cabinet as illustrated. The brackets
have slots for adaptation to the wall.
Secure the cabinet to the wall. Screws
for fixing, washers and plastic plugs are
provided in the assembly kit.
WARNING
The drying cabinet should
not be used without being screwed to a
wall due to the risk of tipping forwards.
Attachment
bracket
Top of the drying
cabinet
The drying cabinet is only designed for
operation indoors in a dry environment.
The drying cabinet should not be installed
in a location where high pressure water is
used for cleaning.
