NIMO 427001376, Руководство по эксплуатации, Страница: 11 / 16

ENGLISH
11
5.6 Programme pause
If the door is opened while the drying process is in progress, the heat will be turned off, and the
fan will continue operating for another 5 minutes.
If the door is closed within this 5 minute period, the drying process will start again from the
beginning.
If the door is left open, the drying process will stop after 5 minutes and must be restarted man-
ually.
5.7 Programme end
When the cool-down period has ended, the drying process is finished, and the display shows the
text
‘end’
(flashing).
When the START/STOPP button is then pressed or the door is opened, the current programme
ends and the display shows the last used programme.
5.8 Ending drying programme
To interrupt a drying process in progress, press START/STOP.
NB:
The fans will continue to run for around 3 min to cool down the element packs.
5.9 Protection against overheating
The drying cabinet is equipped with double protection against overheating.
Overheat cut-out - reset by the user.
Main control
- reset by service personnel.
Overheat cut-out:
If the cabinet overheats during the drying process, the elements are closed and the fan continues.
The display shows
‘ERR 05’ flashing and ‘Wait’ on row 2.
When the temperature in the cabinet has been brought down to an acceptable level (this takes
around 4 min), the display shows
‘ERR 05’ with a
steady light
and the words ”OH PROTECTION”
scrolling on the bottom row.
The overheat cut-out can then be reset by holding down the
START/STOP button for around 4
seconds.
Main control
If the cabinet for any reason overheats outside the drying progress, the main control will trip.
The main control must be reset manually by service personnel who search for the cause while
resetting.