Nimbus Water Systems WIMI6200, Руководство пользователя, Страница: 29 / 72

WiMi6200 User’s Manual
3. Operating the WiMi6200TW/WiMi6200RW
3.1 Operation of DIP switches on the front panel
 DIP switches on WiMi6200T (TX)

ENC Rate
 This DIP switch is used to set encoding bit rate of the input video. The
changes of the DIP switch setting will be effective on the fly during operation.

Refer the “Table-1 Selection of Encoding Rate on the front panel of the
WiMi6200T” on the section 1.5.1

A specific setting this DIP switch to position switches the control of
encoding bit rate to the user interface of Web browser. In this setting, the
encoding rate can be set to arbitrary value from 100kbps to 30Mbps.

Wi-Fi Ch.
 This DIP switch is used to set the Wi-Fi channel frequency and the SSID of
the WiMi6200TW. The changes of the DIP switch setting will be effective on
the fly during operation.

This setting must be same with the setting of the WiMi6200RW.

A specific setting this DIP switch to position switches the
WiMi6200TW system to the LAN mode. And the change of DIP switch setting
from position to other positions shown on table-2 in section 1.5.1
will switch the system to Wi-Fi mode with specific SSID and frequency.

The mode change from Wi-Fi mode to LAN mode will be effective on the fly,
but the change from LAN mode to Wi-Fi mode will reboot the WiMi6200T.

DIP switches on WiMi6200R (RX)
 SYS-ID
Distributed by Pera Systems, Inc. Page 28 v1.2