PN 30005 rev 5
NimbeLink, LLC All Rights Reserved.
5
2. Connect to Kit using a PC
This section covers how to connect your development kit to a PC and
provision the modem with your cellular plan. It also covers how to
communicate over the serial port to the Telit x910 modem which only
requires the use of USB port and connector marked J14 or USB2 in the
diagram below. USB1 (connector J5) is used for Telit firmware updates to
the modem and is not used in this section.
2.1 Unpack Kit Contents
Note: Photo depicts modem removed from baseboard, however, modem ships
pre-mounted to baseboard for ease of assembly.
