where
x
is either
0
for Binary file type, or
1
for ASCII file type, followed by the enter key.
The terminal program should respond with:
OK
3.6 Upload the File to the FTP Server
To upload a file to the FTP server, type the following command into the terminal
program:
AT#FTPPUT=”file.txt”
where
file.txt
is the file you would like to upload, followed by the enter key. The terminal
should respond with:
CONNECT
and begin downloading. Once it is complete, the terminal program will say:
NO CARRIER
3.7 Close the FTP Connection
Once you have downloaded the file that you need, you can close the FTP connection
with the following command:
AT#FTPCLOSE
followed by the enter key.
After a short delay
, the terminal should respond with:
OK
3.8 Deactivate the Data Session (If Necessary)
To close the data session, type the following into the terminal program:
AT#SGACT=1,0
followed by the enter key, and the terminal program should respond with:
OK
PN 30047 rev 2
NimbeLink Corp. All Rights Reserved.
7
