PN 30192 rev 8
© NimbeLink Corp. 2018. All rights reserved.
5
1. Introduction
1.1 Overview
This document is the User Manual for the NL-M1DK-ES, NL-SW-LTE-SVZM20-
ES, and NL-SW-LTE-SVZM20 family of Skywire® modems. The procedure
outlined in this guide walks through installing the Skywire modem, setting up your
workstation, issuing basic commands..
1.2 Archive of Critical Engineering Sample Notes
1.2.1 Engineering Sample
The NL-M1DK-ES are Engineering Sample products. This means that there is
some functionality not enabled yet, and there will be numerous software and
firmware changed and updates in the near future as these features mature.
1.2.2 Modem Firmware
The firmware in the modem may have some limited functionality, but you will
need to update the firmware as part of the out-of-the-box experience.
1.2.3 AT Commands
Not all AT commands listed in the AT Commands Manual are enabled. The
associated Application Notes will reference commands and sequences that are
available at the time of writing and known to be working. If you receive an
ERROR response when trying to use one of the commands not listed in an
Application Note, you can expect that the implementation is not complete for
that feature.
1.2.4 Lower Power Modes
We do not advise performing any advanced power testing at this time. Low
power modes (and power-save modes) are not available in current firmware so
results are not representative of the product’s true capabilities yet.
1.2.5 Supported LTE Bands
LTE Band 111 and B222 are the 2 bands supported in this module version.
Band 111
: 6 MHz of 3GPP Band 29, which is an SDL band, paired with 5 MHz
of PCS-H block.
Band 222
: 25 MHz of downlink portion of 3GPP Band 70, paired with 5 MHz of
PCS-H block
.
