2.4.2
Verizon Firmware
Once your system has rebooted, navigate to the extracted Verizon firmware file that you
have downloaded. Then, as Administrator, run
RHL75xx.V.3.15.151600.201802071640.x7160_1_signed_EXE.exe
You will see the following screen:
Initial Screen
Plug your modem into the Skywire Development Kit, plug the USB cable into Port J5,
plug in the power cable, and plug the USB cable into your workstation. Press the
ON_BTN, and the upgrade process should start. If it does not, remove power, reapply
power, and press the ON_BTN again.
The firmware upgrade process should take less than 10 seconds over USB 2.0. During
the process, you will see a screen similar to:
PN 30270 rev 5
© NimbeLink Corp. 2018. All rights reserved.
8
