NimbeLink NL-SW-LTE-QGB96 Скачать руководство пользователя страница 5

Страница: 5 / 31

1.1.3. Lab Environment

This guide was written using the tools and equipment listed below:

⎻

Windows PC, Windows 7 Professional

⎻

Skywire Development Kit (NL-SWDK)

⎻

Verizon LTE Cat M1 SIM card

⎻

Verizon 4G LTE data plan purchased through

Go.NimbeLink.com

portal

⎻

PuTTY Terminal Emulator, Release 0.70

1.2. Overview

The QBG96 modem contains the LTE-BG96 module manufactured by Quectel. The Quectel

module operates on both LTE-M and the NB-IoT networks. Both of these networks were created

to support IoT devices. Additional background information about LTE-M and NB-IoT networks

will be provided later in this document. The QBG96 Skywire modem offers a theoretical

maximum throughput of 375Kbps downlink and 375Kbps uplink and was designed specifically

for low-power consumption IoT applications.

The QBG96 modem supports the following industry-standards:

⎻

Global Navigation Satellite System (GNSS)

: GPS (United States), Galileo (EU), QZSS

(Japan), Beidou/Compass (China), GLONASS (

Russia)

⎻

Communication Interfaces

: UART, USB (USB 2.0 compliant), I2C

⎻

Internet Protocols

: PPP, TCP, UDP, SSL, TLS, FTP(S), HTTP(S), MQTT, QMI

⎻

Operating Systems

: USB driver support available for Windows 7/8/8.1/10, Linux

2.6/3.x/4.1, and Android 4.x/5.x/6.x/7.x.

2. Resources

2.1. NimbeLink Resources

The

NimbeLink QBG96 product page

is the best place to start for any reference material. Follow

the link above and scroll to the section labeled, “Documentation”, which is also shown in the

image below.

PN 1002152 REV A

Содержание NL-SW-LTE-QGB96






























Результаты поиска

Содержание NL-SW-LTE-QGB96

Отзывы:

Похожие инструкции для NL-SW-LTE-QGB96

Бренды по названию

Популярные бренды

NimbeLink NL-SW-LTE-QGB96, Быстрый старт

Результаты поиска

Содержание NL-SW-LTE-QGB96

Отзывы:

Похожие инструкции для NL-SW-LTE-QGB96

Бренды по названию

Популярные бренды