⎻
eSIM: If you are using the soldered down Verizon eSIM that comes included with
the QBG96 modem,
will walk you through the process of setting it
up.
2. PDP Context Configuration -- A brief description of a PDP context is given below. More
.
⎻
PDP context, which stands for Packet Data Protocol context, is a data structure
that contains the user’s session information. Essentially a PDP context is a
container that holds information the network needs before you are allowed
access.
⎻
Two pieces of information are required to correctly set up a PDP context, the
name of your APN, and the type of IP address you are using (IPV4, IPV6, or
IPV4V6).
3.5.2. Selecting the Soldered-Down SIM (eSIM)
If you are using a SIM card you may skip this section.
By default, the modem is configured to attempt to use the SIM card slot. However, you can use
AT commands to select which SIM the modem uses. To configure the modem to use the
soldered-down SIM, issue the following commands in the order they appear below:
a. Turn off cellular functionality:
Command:
AT+CFUN=0
Response:
OK
b. Configure modem to use soldered-down SIM
Command:
AT+QCFG="gpio",1,26,1,0,0,1
Response:
OK
Command:
AT+QCFG="gpio",3,26,
1
,1
Response:
OK
c. Turn on cellular functionality:
Command:
AT+CFUN=1
Response:
OK
If you do not want to use the soldered-down SIM and would like to revert back to using a
physical SIM card, issue the following commands in the order they appear below:
a. Turn off cellular functionality:
Command:
AT+CFUN=0
PN 1002152 REV A
© NimbeLink Corp. 2019. All rights reserved.
17
