8
EN
FIXING
THE
FRAME
TO
THE
DOC
When you have inserted the belts in their housings, you may assemble the resulting unit with
your DOC.
Rest the semi-frame on the DOC and
pass the belts underneath it
Use the Allen wrench supplied to adjust
the width of the support to suit the DOC
used.
Pass the belts so that they are tight and
the DOC adheres perfectly to the
structure.
To prevent the strap from dragging on
the ground, we suggest you turn the
extra part of the strap up and hold it in
place with the clamp provided.
If using velcro straps, simply thread
the strap through the supports and
stick it together..
CAUTION: ADJUST WIDTH
SYMMETRICALLY AND CHECK THAT
THE CONTROL LEVER PART IS IN THE
MIDDLE OF THE PLATFORM
.
Содержание DOC KART
