7
EN
Inflate the wheels
For safety reasons, the wheels are not inflated in the
package. Please use the supplied instruments to
inflate the wheels to about 2.5 atm before driving
DOC ECO.
Once assembled, make sure that:
-
The handlebar and steering column are joined and no movement or noise is perceptible.
-
The ON/OFF switch works correctly.
-
The height adjustment lever is closed. If this is not the case, the handlebar rod could move,
causing you to lose control of the vehicle.
-
The rear wheel break pedal can move freely without obstacles.
U
SE
TURN DOC ECO ON
Do not stand on the board during this operation.
Enable or disable the speed switch
To enable: press the switch.
To disable: press the switch again.
IMPORTANT: CHECK LOCAL LAWS ON
ANY SPEED LIMITS
.
Stand on the board
Place one foot on the board, avoid starting the
rear wheel brake during this operation.
Start driving DOC ECO
Start with one foot on the ground, push DOC ECO
forward while simultaneously accelerating.
Slowing and braking
Release the accelerator to slow.
To immediately brake DOC ECO, place your
foot on the rear wheel brake pedal.