Nilfisk-ALTO POSEIDON 2-35 PE, Руководство по эксплуатации

Страница: 9 / 20

9
POSEIDON PE
Original Instructions
4.1.2 Connecting the high
pressure hose and the
water hose
1. Connect the high pressure
hose to the high pressure
inlet by means of the quick
coupling. Use max. 50 m
extension hose.
2. Before connecting the water
hose to the washer, rinse the
water hose briefl y to prevent
sand and other dirt from
entering into the washer.
3. Open the tap.
NOTE!
See chapter 8.3 for required
quantity of water and water
pressure.
In the case of poor water quality
(sand, etc.), we recommend
that a fi ne water fi lter is fi tted in
the water inlet.
4.1.3 Fuelling WARNING!
Always shut off the engine
and let it cool for at least two
minutes before fuelling.
Avoid spilling fuel.
If you do spill fuel when fuelling,
do not start the engine before
the spilled fuel has evaporated.
If the washer is on a trailer, any
fuel spills must be wiped up
before the machine is started.
Never expose the machine
to an open fl ame. Smoking is
prohibited during fuelling. Also
read the operating manual for
the fuel engine.
Note: Never operate the
ma chine in a closed room; the
exhaust fumes are dan ger ous.
Follow the safety instructions
in chapter 1!