manualshive.com logo in svg

Nilfisk-Advance BA 625, Руководство по обслуживанию

Nilfisk-Advance BA 625 - экологически чистая и энергоэффективная машина для уборки пола. У нас вы можете бесплатно скачать Руководство пользователя и сервисное руководство для обслуживания. Загрузите их с manualshive.com. Получите доступ к подробной информации о данном продукте и его обслуживании.

Поделиться
Скачать
background image

12

 - FORM NO. 56043098 - Convertamatic

™ 

24, 26, 28, 32 / BA 625, 725, 825

KNOW YOUR MACHINE
DESCRIPTION OF INDICATORS ON THE CONTROL PANEL:

In general, the following guidelines apply to the control panel indicators:
A 

fl

 ashing green or yellow 

indicator means that a fault has occurred in the particular system. An example of this would be an over-current fault.

A 

yellow 

indicator means that the particular function has been enabled but is not currently on. For example, if a scrub mode is selected and the 

throttle is in neutral, the scrub system, vacuum, and solution indicators will all be yellow indicating that the systems are enabled and ready to turn 
on when the throttle is moved to forward or reverse.
A 

green 

indicator means that the particular system is on.

A 

fl

 ashing green 

indicator means that the particular system is in a delayed-off condition. An example of this is when a scrub mode is selected and 

the throttle goes from forward or reverse to neutral. When this happens the vacuum indicator will 

fl

 ash green indicating that the vacuum is still on but 

that it will be turning off after the delay period.

Scrub OFF Indicator (J):

• This indicator will be green if the scrub system is off and ready to be activated.
• This indicator will be red if the scrub system has been turned off and the scrub deck is not up yet.
• This indicator will 

fl

 ash red if there is a fault in the scrub system.

• This indicator will be off if the scrub system has been activated.

Regular Scrub ON Indicator (K):

• This indicator will be yellow if the scrub system is enabled in “Regular” scrub mode but the drive paddle is in neutral.
• This indicator will be green if the scrub system has been turned on in “Regular” scrub mode and the machine is moving in either direction.
• This indicator will be off if the scrub system has been turned OFF.

Heavy Scrub ON Indicator (L):

• This indicator will be yellow if the scrub system is enabled in “Heavy” scrub mode but the drive paddle is in neutral.
• This indicator will be green if the scrub system has been turned on in “Heavy” scrub mode and the machine is moving in either direction.
• This indicator will be off if the scrub system has been turned OFF.

Extreme Scrub ON Indicators (K & L):

• Both of these indicators will be yellow if the scrub system is enabled in “Extreme” scrub mode but the drive paddle is in neutral.
• Both of these indicators will be green if the scrub system has been turned on in “Extreme” scrub mode and the machine is moving in either 
direction.

Control panel LED Display (D):

See the detailed drawing shown in the Know Your Machine manual section for the speci

fi

 c description of the individual icon symbols. 

NOTE: 

If a 

speed control fault occurs (error code 3) the wand indicator will 

fl

 ash the fault code produced by the Curtis speed control. Refer to the service manual 

troubleshooting section for details.

Wand Switch Indicator (M):

• This indicator will be green if the Wand Switch has been turned ON.
• This indicator will be off if the Wand Switch has been turned OFF.

Vacuum System Indicator (N):

• This indicator will be green if the vacuum is on.
• This indicator will 

fl

 ash green if the vacuum is in the 10 second delayed-off condition.

• This indicator will be yellow if the vacuum is enabled but the drive pedal is in neutral.
• This indicator will 

fl

 ash yellow if there is a vacuum system fault.

• This indicator will be off if the vacuum is disabled and turned off.

Solution System Indicator (O):

• This indicator will be green if the solution is on.
• This indicator will be yellow if the solution is enabled but the drive paddle is in neutral.
• This indicator will 

fl

 ash yellow if there is a solution system fault.

• This indicator will be off if the solution is disabled and turned off.

Chemical “AXP / EDS” System Indicator (P):

• This indicator will be green if the AXP / EDS system is on.
• This indicator will be yellow if the AXP / EDS system is enabled but the drive paddle is in neutral.
• This indicator will be off if the AXP / EDS system is disabled and turned off.

Extended Scrub System Indicator (Q):

• This indicator will be green if the Extended Scrub system is on.
• This indicator will be yellow if the Extended Scrub system is enabled but the recovery tank switches haven’t been activated.
• This indicator will be off if the Extended Scrub system is disabled and turned off.

revised 5/07

Содержание BA 625
















































































Отзывы:

Нет отзывов

Похожие инструкции для BA 625

Hagan Z01 Installation Instructions Manual preview
Z01
Бренд: Hagan Страницы: 6
Singer 12K222 Parts List preview
12K222
Бренд: Singer Страницы: 29
Stamina 40-0100B Owner'S Manual preview
40-0100B
Бренд: Stamina Страницы: 15
Toyota 3314 OTHER Manual preview
3314 OTHER
Бренд: Toyota Страницы: 48
GBC CombBind C110E Instruction Manual preview
CombBind C110E
Бренд: GBC Страницы: 74
Janome MEMORYCRAFT 300E Instruction Book preview
MEMORYCRAFT 300E
Бренд: Janome Страницы: 48
Alto Clarke Encore L26 Cylindrical Operator'S Manual preview
Clarke Encore L26 Cylindrical
Бренд: Alto Страницы: 32
Consew 206RBL Instruction Manual preview
206RBL
Бренд: Consew Страницы: 26
Fellowes Binding Machine Instructions Manual preview
Binding Machine
Бренд: Fellowes Страницы: 11
Baum 714XA A-2-P-1 Instruction Manual preview
714XA A-2-P-1
Бренд: Baum Страницы: 49
Singer 3100 SERIES 569U Service Manual preview
3100 SERIES 569U
Бренд: Singer Страницы: 22
Brother BB370 Quick Setup Manual preview
BB370
Бренд: Brother Страницы: 2
Brother CS9100 Operation Manual preview
CS9100
Бренд: Brother Страницы: 80
Brother CS-8150 Operation Manual preview
CS-8150
Бренд: Brother Страницы: 141
Brother CV3550 Operation Manual preview
CV3550
Бренд: Brother Страницы: 37
Brother BAS-750 Parts Book preview
BAS-750
Бренд: Brother Страницы: 113
Brother DA-9280 Manual preview
DA-9280
Бренд: Brother Страницы: 36
Brother Boutique-S15 Instruction Book preview
Boutique-S15
Бренд: Brother Страницы: 35

Бренды по названию

Популярные бренды

Загрузить еще бренды