Nilfisk-Advance ATTIX 33-2H PC / IC, Инструкция по эксплуатации

Страница: 22 / 27

1)
OEL=Occupational Exposure Limit,
*)
Optional accessories / Option depending on model
Original instruction
6
air socket and a hose with a
length of maximum 4 m and a
nominal diameter of minimum
50 mm.
2.3 Spare parts and accessories
CAUTION
Spare parts and accessories.
The use of non-genuine spare parts, brushes
and accessories can impair the safety and or
function of the appliance.
Only use original spare parts and accessories from
Nilfisk. Spare parts that can affect health and safety
of the operator and or function of the appliance, are
specified below:
Description Order No.
Flat filter PTFE, 1 pcs. 107413540
Dust Class H filter, 1 pcs 107413555
Fleece filter bag, 5 pcs. 107413547
Disposal bag, 5 pcs. 107417821
Safety filter bag, 5 pcs. 107413549
Motor cooling air filter PET, 1 pcs. 107413541
2.4 In explosive or inflammable atmosphere
CAUTION
This machine is not suitable for use in explo-
sive or inflammable atmospheres or where
such atmospheres are likely to be produced
by the presence of volatile liquid or inflamma-
ble gas or vapour.
3 Control / Operation
CAUTION
Damage due to unsuitable mains voltage.
The appliance can be damaged as a result of
being connected to an unsuitable mains volt-
age.
•
Ensure that the voltage shown on the rat-
ing plate corresponds to the voltage of the
local mains power supply.
3.1 Starting and operating of the machine
Check that the electrical switch is switched off (in
position 0). Check that suitable filters are installed
in the machine.Then connect the suction hose into
the suction inlet at the machine by pushing the hose
forward until it fits firmly in place at the inlet. Then
connect the tubes with the hose handle, twist the
tubes in order to ensure that they are properly fitted.
Attach suitable nozzle to the tube. Choose nozzle
depending on what type of material that is to be
picked-up. If used for dust extraction in connection
M
with dust producing tool then connect end of suc-
tion hose with appropriate adapter. Check that hose
diameter setting corraspondes to actual hose dia-
meter. Connect the plug into a proper electrical out-
let. Put the electrical switch into position I in order to
start the motor.
Turn I: Activate the machine
Turn 0: Stop the machine
Turn I: Activate the machine –
turn clock wise for speed control
Turn 0: Stop the machine
Turn : Activate Auto-On/Off
operation – turn counterclockwise
for speed control
Turn I: Activate the machine
Turn : Stop the machine.
Permanent power on socket.
Turn : Activate Auto-On/Off
operation.
Turn I+ Off: Activate the
machine with deactivated auto-
matic filter cleaning function
Turn + Off: Activate Auto-
On/Off operation with deactivated
automatic filter cleaning function.
Speed control operation on separate
turning knob
The hose diameter and the setting for suction hose
diameter must be the same.
ø
21
ø2
7
ø32
ø3
6
ø3
8
ø21 ø21
ø27 ø27
ø32 ø32
ø36 ø36
ø38 ø38
3.2 Auto-On/Off socket outlet for power tools
*)
CAUTION
Appliance socket.*
The appliance socket is designed for electrical
auxiliary equipment; see technical data for ref-
erence.
•
Prior to plugging in an appliance, always
switch off the machine and the appliance
that is to be connected.
• Read the operating instructions to the ap-
pliance to be connected and observe the
safety notes contained in these.
An appliance socket with earthing contact is inte-
grated in the machine. An external power tool can
be connected there. The socket features permanent
power on
*) , when the electrical switch is in position