Nilfisk-Advance 56314000, Инструкция по эксплуатации

Страница: 12 / 29

FORM NO. 56041583 - Adgressor
™
/ BR 850S, 850CS, 950S, 950CS, 1050S, 1050CS - 11
ENGLISH / 11
Wand Switch Indicator (H):
•
This indicator will be green if the Wand Switch has been turned ON.
• This indicator will be off if the Wand Switch has been turned OFF.
Speed Selector Indicator (M):
•
This indicator will be green if a scrub mode has been selected and the faster scrub speed has been selected.
• This indicator will be off if the Speed Select Switch has been turned OFF.
Vacuum System Indicator (P):
•
This indicator will be green if the vacuum is on.
• This indicator will fl ash green if the vacuum is in the 10 second delayed-off condition.
• This indicator will be yellow if the vacuum is enabled but the drive pedal is in neutral.
• This indicator will fl ash yellow if there is a vacuum system fault.
• This indicator will be off if the vacuum is disabled and turned off.
Solution System Indicator (Q):
•
This indicator will be green if the solution is on.
• This indicator will be yellow if the solution is enabled but the drive pedal is in neutral.
• This indicator will fl ash yellow if there is a solution system fault.
• This indicator will be off if the solution is disabled and turned off.
Power Saving Sleep Function
The Adgressor is equipped with a battery saving feature that will turn all of the machine systems and accessories off if the machine is left in an idle state for a
preset period of time. This sleep mode will only occur if the operator is not on the seat and the wand function is not in use. The sleep mode is indicated by a
short duration green fl ashing scrub system off indicator. The sleep function is automatically cancelled when the operator sits on the seat or any of the control
switches are pressed. The sleep delay period is adjustable from 10 to 90 minutes in 10 minute increments. The default period is 10 minutes. It can also be
disabled. Refer to the service manual for changing the delay period.
CONTROL SYSTEM ERROR CODES
Display Code .................... Fault description
01....................................... Non-Critical Control
02....................................... Critical Control
03....................................... Speed Control
04....................................... Scrub Deck Lift Actuator Overload
05....................................... Squeegee Lift Actuator Overload
06....................................... Brush Motor Overload
07....................................... Vacuum Motor Overload
08....................................... Contactor / Solution Solenoid Overload
17....................................... Scrub Deck Lift Actuator Open
18....................................... Scrub Deck Lift Actuator Short
19....................................... Squeegee Lift Actuator Open
20....................................... Squeegee Lift Actuator Short
21....................................... Brush Motor open
22....................................... Brush Motor Short
23....................................... Vacuum Motor Open
24....................................... Vacuum Motor Short
25....................................... Contactor / Solution Solenoid Open
26....................................... Contactor / Solution Solenoid Short
27....................................... No Accessory / Wiring