Nilfisk-Advance 56110000, Руководство по обслуживанию

Страница: 17 / 102

FORM NO. 56043124 - Condor XL
™
- 17
MAINTENANCE
HYDRAULIC OIL
Open and prop the Engine Cover (3) to access the hydraulic oil reservoir. Remove the Fill Cap (44) from the tank and look to the bottom of the fi ller
screen. If the oil level is below the bottom of the fi ller screen, add 10W-30 motor oil until the bo ttom of the fi ller screen is covered. (The oil level
should not be higher than 1/2” (12.7mm) above the bottom of the fi ller screen.) Change and fl ush the oil if major contamination from a mechanical
failure occurs.
ENGINE MAINTENANCE
ENGINE OIL – GASOLINE / PETROL AND LPG
Check the engine oil level when the machine is parked on a level surface and the engine is cool. Change the engine oil after the fi rst 35 hours
of operation and every 150 hours after that. Use any SF or SG rated oil meeting API speci fi cations and suited to seasonal temperatures. Refer
to the engine manufacturers’ service manuals for oil capacities and additional engine speci fi cations. Replace the oil fi lter with every oil change.
TEMPERATURE RANGE OIL WEIGHT
Above 60° F (15° C) SAE 10W-30
Below 60° F (15° C) SAE 5W-30
ENGINE OIL – DIESEL
Check the engine oil level when the machine is parked on a level surface and the engine is cool. Change the engine oil after the fi rst 35 hours of
operation and every 150 hours after that. Use CF, CF-4 or CG-4 oil meeting API speci fi cations and suited temperatures.
* Important: Reference the oil/fuel type note below for further diesel oil recommendations. Refer to the engine manufacturers’ service manuals for
oil capacities and additional engine speci fi cations. Replace the oil fi lter with every oil change.
TEMPERATURE RANGE OIL WEIGHT
Above 77 °F (25 °C) SAE 30 or 10W-30
32 °F to 77 °F (0 °C to 25 °C) SAE 20 or 10W-30
Below 32 °F (0 °C) SAE 10W or 10W-30
* Diesel Lubricating Oil Note:
With the emission control now in effect, the CF-4 and CG-4 lubricating oils have been developed for use with a low-sulfur fuel used in on-road vehicle
engines. When an off-road vehicle engine runs on a high-sulfur fuel, it is advisable to employ the CF, CD or CE lubricating oil with a high total
base number. If the CF-4 or CG-4 lubricating oil is used with a high-sulfur fuel, change the lubricating oil at shorter intervals.
Recommended lubricating oil when low-sulfur or high-sulfur fuel is employed
Fuel
Lubricating
Oil class
Low sulfur
(0.5 % ≥ )
High sulfur Remarks
CF
O O
TBN ≥ 10
CF-4
O X
CG-4
O X
O : Recommended X : Not recommended
SPECIAL LIQUID PROPANE FUEL SYSTEM MAINTENANCE ON THE GM 1.6L ENGINE
Every 150 hours inspect and drain any oil buildup from the LP fuel system electronic pressure regulator (EPR). During the course of normal opera-
tion, oils or “heavy ends” may build inside the chambers of the propane regulator. These oils and heavy ends may be a result of poor fuel quality,
contamination of the fuel supply chain, or regional variation in the makeup of the fuel. If the oil buildup is signi
fi cant it can affect the function of the
fuel control system. Note: Reference the Tier 2 PSI 1.6l PFI certi fi ed engine service manual, form # PSI1P6LPFI-A, and follow the procedure to
drain the EPR regulator.