Nilfisk-Advance 107146895, Руководство по обслуживанию, Страница: 81 / 101

SM_MH 3M_4M Ver.1.2_May 2016
Service / Repair
81
F
Heating system.
Water break tank lifted from its bracket
Lift the fuel tank a little bit, and then pull the tank out
as shown above. When the fuel tank is as far out as
shown above, the fuel hoses (2), and the fuel level
sensor (if installed) must be dismounted before re-
moving the tank completely.
When installing the tap in fuel tank, there is a small
tap on the bottom of the fuel tank that must go into a
slot in the frame.
On the picture above you can see the small tap posi-
tioned correctly in the slot.
Fuel tank dismount