Niles StageFront Home Theater Solutions Pro15SW, Руководство по установке

Страница: 9 / 24

,%6%, ,/70!33
'3&26&/$: '3&26&/$: -/6)%
-/6)%
-53)#
-53)#
3%450
0(!3% ()'(0!33
0/
0''
(Z(Z ŽŽ (Z(Z
(Z Ž (Z
Figure 3
. The Pro15SW’s front panel contains the subwoofer’s operation controls.
4
1
2 3
5
7
CONTROLS AND CONNECTORS
OPERATION CONTROLS
The Pro15SW’s operation controls are located on the unit’s front panel, as shown
in
Figure 3
. They function as follows:
1. MUSIC/MOVIE LEVEL and SETUP Controls: While listening to music, move SETUP
switch to MUSIC and adjust the MUSIC LEVEL control to set the desired bass
level. Similarly, while listening to a movie, move SETUP to MOVIE and adjust the
MOVIE LEVEL control to set the desired bass level. Each level control includes an
accompanying LED indicator to identify which one is currently active as triggered by
your home theater sound processor or receiver (see
Figure 3
on page
7
). Also see
SETTING UP THE PRO15SW on page
15
.
2. LOW PASS Frequency Control: Use this control to set the subwoofer’s low-pass
crossover frequency from 40 to 120 Hz. For more details, see SETTING UP PRO15SW
on page
15
.
3. PHASE Control: Use this control to set the subwoofer’s phase response from 0 to
180°. See SETTING UP THE PRO15SW on page
15
.
4. HIGH PASS Frequency adjustment with ON/OFF switch: Use the HIGH PASS control
to set the high-pass crossover frequency from 60 to 160 Hz (according to your
loudspeaker manufacturer’s recommendation) to drive a satellite loudspeaker system
amplifier from the line-level AUDIO OUT jacks (also see
Figure 3
on page
7
.) To
activate the filtered signals, set the ON/OFF switch to ON.
5. The MODE indicator (on the far right) shows which power mode is active, as set by
the (Auto) POWER switch (see
Figure 3
on page
7
): Green is ON; Red is STANDBY.
(CONTINUED ON NEXT PAGE)