manualshive.com logo in svg

Niles SS-4, Руководство по установке и эксплуатации, Страница: 8 / 8

Поделиться
Скачать
Niles SS-4 Скачать руководство пользователя страница 8

3. Locate the on/off buttons on the SS-4/SS-6 which correspond
to the speaker pairs you wish to play. Set them to the ON position.

4. Turn on the amplifier or receiver and select a source, such
as the tuner or CD player.

5. Slowly turn up the amplifier or receiver volume and set it to
a comfortable (not maximum) listening level. Be careful not to
overdrive or “clip” your amplifier. If the sound becomes
muddy or distorted, you have reached the limit of your ampli-
fier’s volume capability and should quickly reduce the volume
to avoid damaging your speakers.

6. To turn off one or more speaker pairs, simply press the corre-
sponding on/off button(s) on the SS-4/SS-6. Refer to the
Protection chart for the correct setting of the Protection button.

13

S

P E A K E R

S

E L E C T I O N

S

Y S T E M

Features and Benefits

The SS-4/SS-6 offers a number of improvements over other 
speaker selectors:

• Power handling: 100 watts per channel RMS

• Protection circuit safeguards receiver/amplifier

• Separate left and right ground paths for compatibility with

all amplifiers, including bridged designs

• Removable screwless connectors accommodate up to 

14 gauge wire

• Rugged all metal chassis construction

• Non-skid feet won’t scratch furniture and ensure unit stability

during operation 

• 72 adhesive-backed room identification labels 

• Requires an amplifier that is compatible with a 4 ohm load 

• Warranty: Ten-year limited

• Dimensions: 8-1/2" wide x 2" high x 6-3/4" deep (SS-4); 

11-1/2" wide x 2" high x 6-3/4" deep (SS-6)

• Shipping weight: approximately 4 lbs (SS-4); 5 lbs (SS-6)

2

S

P E A K E R

S

E L E C T I O N

S

Y S T E M

TECH

SUPPORT

HOTLINE

If you have questions

regarding the 

operation of the 

Niles SS-4/SS-6, 

contact your local

Niles dealer or Niles
Customer Service at

1-800-289-4434.

DS00359ACN/SS-4/SS-6 Printer  11/19/03  5:09 PM  Page 13

Содержание SS-4









Отзывы:

Нет отзывов