background image

CONGRATULATIONS!

Thank you for purchasing the Niles SI-275, one of the most flexible and conve-
nient amplifiers ever offered. Like all Niles products, the SI-275 is built to the
highest standards of quality control and reliability. With proper installation and
operation, you'll enjoy years of trouble-free use.

Niles manufactures the industry's most complete line of custom installation compo-
nents and accessories for audio/video systems. For a free full line catalog write: 
Niles, Catalog Request, P.O. Box 160818, Miami, Florida 33116-0818

1

TABLE OF CONTENTS

INTRODUCTION

2

FEATURES AND BENEFITS

3

INSTALLATION CONSIDERATIONS

5

FRONT AND REAR PANEL DETAILS

9

INSTALLATION

11

OPERATION

15

TROUBLESHOOTING GUIDE

16

SPECIFICATIONS

18

CAUTION:

TO REDUCE

THE RISK OF ELECTRICAL
SHOCK, DO NOT REMOVE
COVER. NO USER-SERVICE-
ABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED
SERVICE PERSONNEL.

CAUTION

The lightning flash with arrowhead symbol, within an
equilateral triangle, is intended to alert the user to the
presence of uninsulated dangerous voltage within the
product’s enclosure that may be of sufficient magnitude
to constitute a risk of electric shock to persons.

The exclamation point within an equivalent triangle is
intended to alert the user to the presence of important
operating and maintnance (servicing) instructions in the
literature accompaying the appliance.

CAUTION:

TO PREVENT ELECTRICAL SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT

ATTENTION:

POUR EVITER LES CHOCS ELECTRIQUES, INTRODUIRE LAME LA PLUS LARGE DE LA FICHE

DANS LA BOURNE CORRESONDANTE DE LA PRISE ET POUSSER JUSQU’AU FOND

WARNING

: TO REDUCE THE RISK OF ELECTRICAL SHOCK, DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR

MOISTURE

DS00219CMY-SI-275.qxp  6/7/05  3:18 PM  Page 1

Содержание SI-275 Export





















Отзывы: