Installing the Security Bracket and Cable
1. With the loudspeaker in the proper location, turn the loudspeaker over so the
bottom of the loudspeaker is facing you, as shown in
Figure 7
.
2. Take the nylon security cable, supplied with the loudspeaker and fold it in half.
Using the middle of the cable, feed it through the Security Attachment Eyelet as
shown in
Figure 8
.
3. Feed the opposite end of the nylon security cable through the exposed portion
of the cable that was just fed through the security eyelet, as shown in
Figures 9
and
10
.
4. Pull the ends of the security cable
with the loops as tight as you can until
the knot around the security eyelet is
tightened as shown in
Figure 11
.
5. Feed the Security Stake through the
loops at the end of the security cable
and insure that they are inserted into
the cable holder provided at the top of
the stake, as shown in
Figure 12
.
IN
ST
A
LL
A
TIO
N
15
Figure 7
Bottom of Loudspeaker
Figure 8
Security Cable in Eyelet
Figure 9
Security Cable
Looping Through
Figure 10
Security Cable after Looping
Figure 11
Security Cable
Connected and Tightened
