21
Specifications
Specifications
Model PR5
Driver Complement
5-1/4” Talc-Filled Polypropylene Woofer
with Custom Debris Screen and Butyl
Rubber Surround
3/4” Kaladex
®
Tweeter Housed in a
Low Diffraction Precision Adjustment
Mechanism
Design Principle
Infinite baffle for large and varying air
volumes
Recommended Amplifier Power
Ten to One Hundred Watts per Channel
Nominal Impedance
8 Ohm
Frequency Response
70 Hz to 20,000 Hz, plus or minus 3dB
(on axis)
Dispersion Pattern
90 degrees Horizontally or Vertically
(plus or minus 5dB)
Sensitivity
88 decibels for 2.83 volts of Pink Noise,
measured at 1 meter on axis
Overall Exterior Frame Dimensions
7-1/8” x 9-7/8” (18.1 cm x 25.1 cm)
Depth Behind Wall
3-1/8” (7.9 cm) Deep
(assumes 1/2” drywall)
Wall Cut-Out Dimensions
6-1/4” x 9” (15.9 cm x 22.9 cm)
Wiring Requirements
We recommend 16 to 18 gauge stranded
for up to 80 feet, 14 gauge stranded for up
to two hundred feet. Connectors accom-
modate 12 to 18 gauge stranded wire.
22
Specifications
Specifications
Model PR6
Driver Complement
6-1/2” Talc-Filled Polypropylene Woofer
with Custom Debris Screen and Butyl
Rubber Surround
3/4” Kaladex
®
Tweeter Housed in a
Low Diffraction Precision Adjustment
Mechanism
Design Principle
Infinite baffle for large and varying air
volumes
Recommended Amplifier Power
Ten to One Hundred Twenty Five Watts
per Channel
Nominal Impedance
8 Ohm
Frequency Response
60 Hz to 20,000 Hz, plus or minus 3dB
(on axis)
Dispersion Pattern
90 degrees Horizontally or Vertically
(plus or minus 5dB)
Sensitivity
89 decibels for 2.83 volts of Pink Noise,
measured at 1 meter on axis
Overall Exterior Frame Dimensions
8-3/4” x 11-11/16” (22.2 cm x 29.7 cm)
Depth Behind Wall
3-1/8” (7.9 cm) Deep
(assumes 1/2” drywall)
Wall Cut-Out Dimensions
7-5/8” x 10-5/8” (19.4 cm x 27.0 cm)
Wiring Requirements
We recommend 16 to 18 gauge stranded
for up to 80 feet, 14 gauge stranded for up
to two hundred feet. Connectors accom-
modate 12 to 18 gauge stranded wire.
