Niles OS-25, Инструкция по установке и эксплуатации

Страница: 8 / 12

If you are using an applicator or brush and a can of paint, thin the paint first.
Thick paint will tend to clog the grille holes.
Replacing the Grille
Carefully fit the grille into its recess so that it is barely in place. Starting with
one corner, go around the speaker, pushing the grille in a little bit each time.
You should be gentle, the aluminum grille can be easily bent out of shape. You
will feel a positive “snap” when it is fully in place.
2.
Wipe off the other sides of the cabinet, the bracket, bracket knobs, and grille
with a damp cloth. Do not touch or rub the speakers on the front baffle.
Make sure everything is dry before masking.
3.
Mask off the binding posts and the brass threaded inserts on the back panel
with masking tape.
4.
Mask off the threaded inserts on the top and bottom with masking tape.
5.
Protect the front of the speakers by inserting the supplied paint masks in
place of the grills.
Painting the Cabinet, Bracket Knobs and Bracket
1.
Apply two thin coats of a primer to the cabinet and knobs. We recommend
Krylon Sandable Spray Primer #1318. The bracket doesn't require a coat of primer.
2.
Allow the primer to completely dry.
3.
Apply the finish color.
4.
Allow the paint to completely dry.
5.
Carefully remove the masking material.
6.
Do not reattach the speaker to the bracket e8 To the bracket es dmundted. TryTj0 -1.3684 TD0 Tw(wo tkee anl fhndalng mf the gfreshy raint d paits oo ta inuimum)Tj/F1 1 Tf-1.3258 04.1053 TD-0.0166 Tc0Painting the Crille