background image

11

H

I G H

D

E F I N I T I O N

S

P E A K E R

S

E L E C T I O N

S

Y S T E M

Operation

There are two ways to use the HDL-4. You may play one pair
of speakers at a time, or play multiple pairs simultaneously.

If you intend to play more than one pair of speakers at the
same time, you will need to become familiar with the opera-
tion of the HDL-4's PROTECTION button.

Playing One Pair of Speakers At a Time

1. 

Make sure the amplifier or receiver power is OFF and set

the volume to minimum.

2. 

Locate the ON/OFF button on the HDL-4 which corre-

sponds to the speaker pair you wish to play. Set it to the ON
position.

3. 

Turn on the amplifier or receiver and select a source, such

as the tuner or CD player.

4. 

Slowly turn up the amplifier or receiver volume and set it

to a comfortable (not maximum) listening level. Be careful
not to overdrive or "clip" your amplifier. If the sound
becomes muddy or distorted, you have reached the limit of
your amplifier's volume capability and should quickly reduce
the volume to avoid damaging your speakers.

5. 

To turn off the speaker pair, simply press the correspond-

ing ON/OFF button on the HDL-4.

"TECH TIP"

If your amplifier or

receiver has "A" 

and "B" speaker-

pair outputs, 

connect the HDL-4 

to the "A" outputs.

Do not connect 

anything to "B". 

This will prevent 

the amplifier or

receiver from driving

an unusually low
impedance load.

Содержание HDL-4

















Отзывы: