IN-W
ALL
LOUDSPEAKER
WOOFER TECHNOLOGY
■
8" interlaced glass and carbon-fiber cone is extremely rigid to reduce breakup and lower distortion
even under high power
■
Butyl rubber cone surround damps resonance and provides exceptional durability
■
Sophisticated motor assembly including high BL magnet, extended pole piece, high temperature
aluminum voice coil former and machined top plate for deep bass response and clean bass tones
■
Inverted dust cap for added rigidity and wide mid-bass dispersion
MIDRANGE TECHNOLOGY
■
1-1/2" fluid-cooled tri-laminate Teteron hyperbolic dome midrange driver reproduces critical
midrange sounds with exceptional accuracy
■
NDFE 35 neodymium, high BL magnet motor structures enable compact driver construction
TWEETER TECHNOLOGY
■
1" Tri-laminate Teteron hyperbolic dome tweeter reproduces high frequencies and their harmonics
with crystal clear accuracy
■
Tweeter is housed in a zero diffraction swiveling enclosure that allows installer to control dispersion
patterns for optimal response
AUDIOPHILE FEATURES
■
Linkwitz-Riley filters with premium crossover components provides seamless driver integration
■
Low diffraction, X-Matrix™ reinforced polycarbonate Baffle eliminates unwanted resonance
TONE CONTROLS
■
4 increment (-2dB, Flat, +2dB, +4dB) bass, midrange and treble controls adjust from the front
baffle for fine tuning after installation
INSTALLATION
■
100% rustproof MicroPerf™ aluminum grille conceals loudspeaker elements yet allows full
frequency sound through. Grille can be painted to match décor
■
Moisture and UV resistant materials including all stainless steel and brass hardware stand up to
harsh environments
■
Infrared sensor knockout provides a hidden remote control solution
■
6mm low diffraction X-Matrix reinforced polycarbonate baffler resonance for improved
dynamic range
SPECIFICATIONS
■
Impedance: 8 ohms (4 ohms minimum)
■
Recommended amplifier power: 20W to 200W
■
Frequency response: 30Hz-21kHz +/-3dB
■
Sensitivity: 89dB for 2.83 pink noise, measured at 1 meter on axis
■
Frame dimensions: 11" x 18-3/8"
■
Hole cutout dimension: 9-3/4" x 17-1/4"
■
Depth behind ceiling: 3-3/4" deep (based on 1/2" dry wall)
Warranty: Five-year limited
Shipping weight: 9 lbs
.
AT8000
Stock Number
FG00741
8" In-Wall Loudspeaker
NILES AUDIO CORPORATION
12331 S.W. 130 Street, Miami, FL 33186 Tel: 800.289.4434 –
www.nilesaudio.com
NAAT8000PDF
©2004 Niles Audio Corporation. All Rights Reserved. Niles and the Niles logo are registered trademarks of Niles Audio Corporation.
