We
reserve the right to make changes
Page 7 of 40
Figur 3: Sketch of Compact P
The unit must be installed and leveled on a firm, vibration-free surface. There should be at least
10mm clearance to walls or other permanent installations. Although the unit itself is practically
noise and vibration free, care must be taken to prevent any vibration from being propagated to ad-
joining parts of the building.
The rear angular slide bar of the base frame of the Compact P can be removed in order to make it
possible to push the unit towards the wall to hide water connections etc.
It is important that the condensation outlet of the Compact P be connected to a drain. The unit is
supplied complete with water trap. The outlet should be led frost-free with steady decline to the
nearest drain. The safety valve overflow must also be led to a drain.
If Compact P is enclosed by any covering, it must be possible to remove the covering easily.
