Show data
It is possible to read off relevant data for Comfort units.
Show data
↳
Operating state
Description:
Shows the operating setting in which the unit is
running.
↳
Bypass
Description:
Shows whether the bypass damper is open or closed.
↳
T2 Supply air
Description:
Shows the supply air temperature. If an after-heating
element has been installed, T7 will be shown instead.
↳
T3 Extract air / Room
Description:
Shows the room temperature as an average of the
entire house.
↳
T4 Discharge
Description:
Shows the discharge air temperature.
↳
T7 Supply air
Description:
Shows the supply air temperature provided an after-
heating element has been installed. Otherwise T2 will
be shown.
↳
T8 Outdoor air
Description:
Shows the outdoor temperature before reaching the
pre-heating element.
↳
T9 Water heating element
Description:
Shows the temperature in the water after-heating
element.
↳
Air humidity
Description:
Shows the current air humidity in the house.
↳
CO2
Description:
Shows the current CO2 level in the house (only if
installed).
↳
Supply air fan
Description:
Shows the level at which the supply air fan is
operating.
↳
Extract air fan
Description:
Shows the level at which the extract air fan is
operating.
↳
Unit information
Description:
Select "Unit information" for more information.
↳
Unit type
Description:
Shows the name of the product the software has been
set to work with.
↳
Software version
Description:
Shows the installed software version.
↳
Panel software
Description:
Shows installed software version on the panel.
Comfort 252 / 302 Top / Polar (English)
BY NILAN
13
