REPEATER INSTALLATION
Installation requirements
Installation Location Requirements
No specific installation requirements shall be followed.
Power requirement
DC 12V. Connect the Power adapter to the cigar lighter.
Installation Steps
Installation schemes
INSTALLATION STEPS
1. Find a suitable position for an in-car antenna (e.g. under the seat of a driver).
2. Clear and dry the place where you’re going to fix the in-car antenna. Put up the nylon strap tightly
on the chosen position and stick the device firmly.
3. Plug in the in-car antenna into the in-car antenna interface of the signal booster and fasten it
tightly.
4. Mount out-of-car antenna in the car trunk with the help of two screws.
5. Plug in the out-of-car antenna into the out-of-car antenna interface of the booster and fasten the
screws tightly.
6. Connect the Power with cigar lighter. If the indicator on the booster lights up the installation has
been executed properly.
NOTE: Switch on the signal booster only after installing out-of-car and in-car antennas correctly!
7. Test the signal of your mobile telephone. After installation mobile signal should get maximally
strong within all the car area. In case the mobile connection is still instable try to change the
position of the antennas for a more appropriate one.
Repeater’s ports description
1. Outdoor port: connected with the outdoor antenna by cable
2. Indoor port: connected with indoor antenna directly or by cable
3. Connect the Power with cigar lighter.
Accessories selection
No need. Use standard accessories.
