If the device detects that the incoming signal is weak, try 3 possible solutions:
• Solution 1. Direct the outdoor antenna to provider’s nearest base station.
• Solution 2. Change the position of the outdoor antenna. Try to put it as high as possible.
• Solution 3. Reinstall the outdoor antenna trying to avoid obstacles between the antenna and provider’s base station.
If the device detects that the outdoor antenna is too close to the indoor, change the position of either or both antennas to avoid
self-oscillation. Mount them at least 15m one from another.
If the device detects self-oscillation between the antennas and says that the system is being adjusted, it means that the system
has detected the problem of bad isolation between the antennas and AGC is adjusting the system gain automatically to make the
device work correctly. No actions are required from you.
If the system shows “Device was damaged” note, it means that the uplink/downlink was damaged. Contact customer service for
repair.
What signal level in dBm is optimal for the correct booster functioning?
