Nikrans LCD-300GD Скачать руководство пользователя страница 12

Страница: 12 / 22

Installation with 2 indoor antennas

INSTALLATION STEPS

1. Find an appropriate position for an outdoor antenna. (

see the

equirements in 6.1. sect.

)

2. Plug in the outdoor antenna to the mobile booster from BS side and fasten tightly.

3. Plug in the indoor antenna to the mobile booster from MS side and fasten tightly.

4. Connect the signal booster to the Power Supply.

!Some models have an inbuilt Power Supply. Please, examine the manual applied to your model, if your signal

repeater kit doesn’t include separate Power Supply, skip this step!

If the light indicator on the booster turns on it means the installation has been implemented correctly.

NOTE: Switch on the signal booster only after you connect outdoor and indoor antennas in the proper way!

5. Test the signal of your mobile telephone – a maximum quantity of bars should be indicated on the display of

your phone in each corner of the location within booster coverage zone. In case the mobile signal is still

instable try to change the position of the outdoor antenna for more proper one.

Important notes for installation:

1. Cables from outdoor antenna should not be wound and be placed as straight as possible in order not to

create any hindrance for signal reception and its transmission.

2. Cables should be shortened to the acceptable maximum so that not to waste or decrease mobile signal

coverage range.

3. In order to prevent water from coming into the mobile phone booster through the cable make a loop in it.

4. Keep the outdoor antenna as far as possible from frequency aerials, high voltage cables, metal nets or

transformers.

Содержание LCD-300GD























Результаты поиска

Содержание LCD-300GD

Отзывы:

Похожие инструкции для LCD-300GD

Бренды по названию

Популярные бренды

Nikrans LCD-300GD, Руководство по установке

Результаты поиска

Содержание LCD-300GD

Отзывы:

Похожие инструкции для LCD-300GD

Бренды по названию

Популярные бренды