Nikrans LCD-1503G, Руководство по установке

Страница: 14 / 22

Repeater’s ports description
1. Outdoor port: connected with the outdoor antenna by cable
2. Indoor port: connected with indoor antenna directly or by cable
3. DC IN: connected with power supply.
Accessories selection
Choosing accessories pay attention to the two characteristics – frequency and impedance. All accessories shall support the repeater’s
frequencies. For example, if the repeater’s frequency is GSM900, all the accessories must support the GSM900 frequency.
Repeater Settings
Indicator Light Instructions
Introduction screen. The introductory page is displayed at the screen for 10 sec during the system check-up.
When the device completes the internal self test, it shows the standby screen. If the arrow down is displayed at the bottom right
corner, the device has detected signal reception problems. In this case press Page Down button to see possible solutions. Resolve