Nikon NPL-632 Скачать руководство пользователя

Страница: 28 / 206

Preparation

Field Station NPL-632 Instruction Manual

CAUTION –

Do not

bend, drop or shock the USB memory stick.

CAUTION – When you use or store the USB memory stick, avoid heat, moisture, and direct
sunlight.

CAUTION – Do not attempt to close the card slot cover with a USB memory stick still in the
instrument.

Inserting the USB memory stick into the connector slot

Open the card slot cover. See

Inserting a CF card into the card slot, page 12

Step 1

Note –

Do NOT rotate the knob on the slot cover beyond the limit as this may damage

the knob.

Check the shape of the USB connector and insert it correctly into the
instrument. See

USB Connecters, page 160

Note –

Carefully support the instrument when you insert/remove the USB memory

stick to/from the instrument.

Make sure that the protrusion on the knob is set to the OPEN (vertical) position
and then close the cover.

CAUTION – If you force the cover closed with the protrusion on the knob cover set to the LOCK
(horizontal) position, you may damage the cover.

Rotate the knob counter-clockwise until the protrusion on the knob in set to the
LOCK position.

Note –

To ensure that the cover is firmly locked, the cover remains slightly open if you

do not rotate the knob correctly so that the protrusion points to the LOCK position.
Make sure that the cover is firmly closed.

Transferring files from the instrument to an office computer using USB

If you have installed Microsoft

ActiveSync

technology on your office computer,

you can use the Microsoft Windows

Explorer to:

•

Export files from your office computer to the instrument.

•

Import recorded job files from the instrument to your office computer.

To connect the USB memory stick to the office computer using the connecting cable:

Содержание NPL-632















































































































































































































Результаты поиска

Содержание NPL-632

Отзывы:

Похожие инструкции для NPL-632

Бренды по названию

Популярные бренды

Nikon NPL-632, Инструкция по эксплуатации

Результаты поиска

Содержание NPL-632

Отзывы:

Похожие инструкции для NPL-632

Бренды по названию

Популярные бренды