Nikon NPL-302 Series, Инструкция по эксплуатации

Страница: 233 / 234

Error Messages 10
Pulse Laser Station NPL-302 Series Instruction Manual 213
C
Caution – Selecting
Continue
does not resume the last ST record. You
should only use the
Continue
option if you are sure that the previous ST
coordinates and the current HA orientation are correct. Otherwise, records in
the Stakeout function may not be correct.
Station Setup
10.13
Calc ST Failed Need additional PT
1013.1
Calculating ST failed in resection. This message may appear after you have deleted
a point the View shots screen.
Press any key to return to the PT input screen. Take another shot to calculate the ST
coordinate.
Same Coordinate
1013.2
The input PT or coordinate is identical to the current station in STN/1:Known, or
the same coordinate or point name/number is found in Resection.
Press any key to return to the PT input screen. Then use a different PT.
Space LOW
1013.3
There is not enough space to record a station when you start any of the Station
Setup functions.
XY-coordinate is required
1013.4
The input point for ST/BS does not have N/E coordinates.
Press any key to return to the PT input screen. Then use a PT that has N/E
coordinates.
To ... Press ...
return to the BMS press
[ESC]
or the
Abrt
softkey. Use the
DEL
softkey in Job Manager to delete old jobs.
continue press
[ENT]
or the
OK
softkey. You may not be able
to record the whole process.